Basic Info.
Model NO.
LWS-24S60A-035(15S)
Charging Current
16A
Over Charge Protection
3.9V
Over Discharge Protection
3.0V
Over Current Protection
5+-1A
Type
Flexible Circuit Board
Dielectric
Fr-4
Material
Fiberglass Epoxy Resin + Polyimide Resin
Application
Consumer Electronics
Processing Technology
Delay Pressure Foil
Base Material
Copper
Insulation Materials
Epoxy Resin
Transport Package
Anti-Static Bag Packaging/ Carton Packaging
Specification
L120*W80*T25mm
Trademark
LWS
Origin
China
HS Code
8536300000
Production Capacity
50000 Pieces /Months
Packaging & Delivery
Package Size
12.00cm * 10.00cm * 5.00cm
Package Gross Weight
1.000kg
Product Description
1. Product Description![]() About your products,just tell us the relative voltage/ cells/ current A or equipment etc,
About the battery BMS/PCB/PCM Function: Detect and protect the battery from over-charge ,over-dicharge, over-current short-circuit ,temperature detecting protection and auotmatically voltage balance function . Build with high end electronic components (High End IC and MOSFET ) ,simple structure design will let it have more stable quality working performance , Flexible application( it can be used for less series battery by leaving some connection pins at empty status ),full set of protection measures let it works well without any infulence from external unexpected accidents. |
Electric Switch, Temperature Switch, Balance, 5V output, NTC and etc, if you need any above accessories, please must to contact our sales fisrt. All items are customized as your requirements, if without any request after order placed, we will produce as original. |

Mode | LWS-24S60A-035(15S) |
PCM Size | L120*W80*T25 mm |
battery series | 4S-24S Available |
working current | 60A Available |
Application | LED lights, Emergency lights, Digital Equipment, etc |
Sample | available |

Wiring:
1. First connect the B- of the BMS to the total negative pole of the battery pack;
2.The cable starts from the thin black one connecting B-, the second red wire connects the positive pole of the first string of batteries, and the next string is connected in turn to positive pole of the battery,B-,B1,B2.....B15; then insert the cable into the BMS; (The maximum number of strings is 4-24 strings, the example picture is 15 strings) (Please weld the wires in order and avoid pseudo solder joints.)
3. Connect Charger C-/Load P- with BMS C-/P- (Use larger size wires)
4. Connect Positive Pole: Charger C+/Load P+ with Battery Pack B+ (Use larger size wires) .
1. First connect the B- of the BMS to the total negative pole of the battery pack;
2.The cable starts from the thin black one connecting B-, the second red wire connects the positive pole of the first string of batteries, and the next string is connected in turn to positive pole of the battery,B-,B1,B2.....B15; then insert the cable into the BMS; (The maximum number of strings is 4-24 strings, the example picture is 15 strings) (Please weld the wires in order and avoid pseudo solder joints.)
3. Connect Charger C-/Load P- with BMS C-/P- (Use larger size wires)
4. Connect Positive Pole: Charger C+/Load P+ with Battery Pack B+ (Use larger size wires) .

About your products,just tell us the relative voltage/ cells/ current A or equipment etc,we will help to recommend the most suitable products for you. |
PCM Specifications For 55.5V(15S) Li-ion Battery Packs | |||
Model:LWS-24S60A-035(15S) | |||
No. | Test item | Criterion | |
1 | Voltage | Charging voltage | DC:63V CC/CV |
Balance voltage for single cell | 4.20±0.025V | ||
2 | Current | Balance current for single cell | 84±10mA |
Current consumption | ≤20μA | ||
Max continuous charging current | 50A | ||
Max continuous Discharging current | 50A | ||
3 | Over charge Protection | Over charge detection voltage for single cell | 4.25V±0.025V |
Over charge detection delay time | 0.5S-2S | ||
Over charge release voltage for single cell | 4.05V±0.05V | ||
4 | Over discharge protection | Over discharge detection voltage for single cell | 2.80V±0.08V |
Over discharge detection delay time | 10mS-200mS | ||
Over discharge release voltage for single cell | 3.0V±0.10V | ||
5 | Over current protection | Over current detection voltage | 150mv±25mv |
Over current detection current | 180A ±20A | ||
Detection delay time | 5mS-15mS | ||
Release condition | Cut load,Automatic recovery | ||
6 | Short protection | Detection condition | Exterior short circuit |
Detection delay time | 200-500us | ||
Release condition | Cut load,Automatic recovery | ||
7 | Resistance | Protection circuitry(MOSFET) | ≤20mΩ |
8 | Temperature | Operating Temperature Range | -40~+85ºC |
Storage Temperature Range | -40~+125ºC |
Title goes here. *Complete products contract PCB assembly and manufacturing services *Circuir boards 2 to 30 layers PCB layout,fabrication, PCB assembly and box build *Active and passive components source is directly from original manufacturer *Enclosure cabinet case plastic injection molding,mental stamping,manufacture and assembly *High-precision 0201 size components SMT technology and lead-free *IC pre-program *Hight-precision E-Testing ShenZhen LWSPCM Co;ltd -We are specialzed manufacturer in the lithium battery pack pcb/pcm/bms. The usage ranges cover lithium battery pack (lithium metal batteries),power li-ion batteries(LiCoO2,LINiCoMnO2,LiMnO4 ,LiFePO4) Applications for: mobile phone batteries,Laptop,Tablet PC,power tool,e-bike,electric buses,golf cart power bank etc,involved in digital products,electric vehicle,energy storing device,medical equipment and mobile illumination) and so on. Of which,the LiFePO4 battery balanced protection board is our core products. |






Q: How do I judge what material my battery is ? A: Please take a look at the battery body. LiFePO4 battery: if the normal voltage of your battery shows 3.2V or 3.3V. Li-ion or Li-polymer battery: if the normal voltage of your battery shows 3.6V or 3.7V. LTO battery: if the normal voltage of your battery shows 2.3V or 2.4V. Q: How to choose a suitable BMS/PCM for my battery packs? A: Please tell us following required details and we will advice for you: Battery material & Battery series & Capacity & working current & Application (For example: LiFePO4 BMS, 13 series, charge 40A, discharge 40A, application for e-bike 1800W.) Q: Do you have Minimum Order Requirement (MOQ)? A: Small PCM: 10 PCS MOQ; Large PCM: 1 PCS MOQ. Sample orders or bulk orders are all welcome. Q: Can I require products size? A: We can provide various size and specification is per your requirements, also ODM / OEM is welcome. |